thoenes®
thoenes

Gland packings

Stuffing box packings are safe and reliable seals for dynamic applications. They are used to seal sliding surfaces and rotating parts. They are used in various areas such as pumps, pistons, fittings, valves, autoclaves, paddle dryers and much more. Stuffing box packings are particularly characterized by their high temperature and pressure resistance. They can be used at a temperature of approx. -200 to 450 °C. Depending on the materials used and the design of the stuffing box packings, they have good chemical and physical resistance and can be used with abrasive media.

Stuffing box packings are safe and reliable seals for dynamic applications. They are used to seal sliding surfaces and rotating parts. They are used in various areas such as pumps, pistons,... read more »
Close window
Gland packings

Stuffing box packings are safe and reliable seals for dynamic applications. They are used to seal sliding surfaces and rotating parts. They are used in various areas such as pumps, pistons, fittings, valves, autoclaves, paddle dryers and much more. Stuffing box packings are particularly characterized by their high temperature and pressure resistance. They can be used at a temperature of approx. -200 to 450 °C. Depending on the materials used and the design of the stuffing box packings, they have good chemical and physical resistance and can be used with abrasive media.

Configure Gland packings here:
Close filters
from to
from to
from to
from to
from to
from to
from to
from to
1 From 2
No results were found for the filter!
thoenes® P609 - PTFE packing
thoenes P609 - PTFE packing
Description: Made out of sintered, highly stretched PTFE multi filament yarn with intensive PTFE impregnation. Properties: Good pressure resilience, low extrusion possibility, high cross section spread and structure support as well as...
From €7.10 * / meter
Download data sheet
thoenes® Packing set example
thoenes Packing set example
thoenes® Packing set can consisting of: 4 pieces P666 / GE 60 x 80 x 10.0mm * 2 pieces of pure graphite rings 60 x 80 x 10.0 mm * [graphite content 98%, density 1.6 g / cm³]. * other dimensions available on request
price on request
Hint!
thoenes® P608 PTFE-yarn packing FDA
thoenes P608 PTFE-yarn packing FDA
The gland packing is particularly suitable in fittings (even at higher pressure), piston pumps, mixers, kneaders, agitators, valves and valves for food and pharmaceutical industry. The packings are made of sintered and highly stretched...
price on request
Download data sheet
thoenes® P666 - Graphite packing
thoenes P666 - Graphite packing
Description: P 666: Braided from flexible graphite foil threads and treated with a subsequent intensive mould. The impregnation contains corrosion prevention. Properties: P 666: High temperature packing, good chemical resistance, wear...
From €4.73 * / meter
Download data sheet
thoenes® P653 - Carbon fibre packing
thoenes P653 - Carbon fibre packing
The thoenes® P653 carbon fibre packing is a of continuous filament carbon filaments with PTFE and graphite impregnation packing. Important features: Wear-resistant, suitable for harsh operating conditions, Protects the shaft, Shrinkage,...
From €9.33 * / meter
Download data sheet
thoenes® P644 - Aramid packing
thoenes P644 - Aramid packing
Description: Packing made out of high quality aramid- continuous fibres with PTFE impregnation and lubricant additive. Properties: Very sturdy and wear resistant. Universal for pumps in all industry sectors like chemistry,...
From €7.60 * / meter
Download data sheet
thoenes® P643 - Aramid- PTFE packing
thoenes P643 - Aramid- PTFE packing
Description: Packing of which its contact surface is made out of pure PTFE yarn and its edges and core are made out of aramid. Properties: Through the edge support, it is durable against extrusion, high pressure and especially abrasion....
From €11.96 * / meter
Download data sheet
thoenes® P610 - PTFE packing, oiled
thoenes P610 - PTFE packing, oiled
Description: Made out of sintered, highly stretched PTFE multi filament yarn with intensive PTFE impregnation and silicon free lubricant additive. Properties: Smooth packing with good dry running operation properties and excellent media-...
From €8.33 * / meter
Download data sheet
thoenes® N506 - Ramie packing
thoenes N506 - Ramie packing
Description: Made out of pure ramie yarn with a light special PTFE impregnation to avoid product contamination. Finished with PTFE graphite compound for better heat deflection. Properties: Smooth, good chemical resistance, easy to...
From €7.00 * / meter
Download data sheet
thoenes® P605 - Blended yarn packing
thoenes P605 - Blended yarn packing
Description: Packing made out of special blended yarn, impregnated with a PTFE graphite paraffin oils compound. Properties: Inexpensive all-round packing with good adaptability and wide media resistance. For universal sealing of rotary-...
From €7.43 * / meter
Download data sheet
thoenes® P637 - Polyimide packing
thoenes P637 - Polyimide packing
The thoenes® P637 continuous of oiled polyimide continuous filament fibres. Important features: Good sliding properties and good, some very good electrical insulation properties, Good resistance to organic solvents and fats as well as...
From €9.40 * / meter
Download data sheet
thoenes® P638 - Polyimide- PTFE- Graphite packing
thoenes P638 - Polyimide- PTFE- Graphite packing
The thoenes® P638 polyimide PTFE graphite packing is made from graphite filled PTFE multifilament fibers and polyimide continuous filament fibres. Important features: Good gliding properties, Pressure resistant, Good resistance to...
From €7.18 * / meter
Download data sheet
1 From 2

Materialien und Funktionen von Stopfbuchspackungen

Wie funktionieren Stopfbuchspackungen und wie sind sie aufgebaut? Das Dichtelement in der Stopfbuchspackung bildet die Packung an sich. Sie besteht aus engmaschig verflochtenen Garnen, welche zum Teil imprägniert wurden. Die Imprägnierung soll dabei etwaige Hohlräume im Packungsgeflecht schließen. Auf diese Weise entsteht eine ideale Querschnittsdichte, welche jegliche Leckagewege durch die Packung verhindert. Je nach Anforderung und Einsatzgebiet, fördert die Imprägnierung zudem die Wärmeabfuhr, sie verbessert die Laufeigenschaften oder erhöht die Resistenz gegen verschiedene Medien.

Stopfbuchspackungen werden fest im Einbauraum verpresst. Die Packung wird dazu zunächst in Packungsringe geschnitten, welche wiederum in den Packungsraum eingelegt und mit Hilfe von Schrauben oder zusätzlichen Federn axial verspannt werden. Die radiale Ausdehnung führt anschließend dazu, dass sich die Packung an die Ringraumwand anlegt und das Medium radial fast vollständig abdichtet. Auch bei einem stetigen Temperatur- und Druckwechsel behalten sie dabei konstant ihre Elastizität.

Je nach Stopfbuchspackung, wird das verwendete Garn aus verschiedenen Materialien gefertigt: Bei thoenes® erhalten Sie Stopfbuchspackungen aus Bestandteilen wie Aramid (P640,  -643, -644, -645), Cellulose (C609/639), Ramie (N506), Mischgarn (P605), Polyimid (P637/638), PTFE (P609/geölt = 610), PTFE mit Grafit (P639), Novoloid (P646), Reingrafitfoliefäden (P666) oder Carbon/Kohlenstoff (P653). Neu im Sortiment ist unser PTFE Garn mit FDA-Zulassung (P608 und geölt = P611). Ausschließlich das Garn besitzt die FDA-Zulassung. Aufgrund dessen ist es besonders für den Einsatz im Lebensmittelbereich geeignet. 

Stopfbuchspackung aus Graphit kaufen

Besonders gefragt sind Stopfbuchspackungen aus Graphit. Unsere Graphit-Packungen werden aus flexiblen Graphitfoliefäden geflochten und anschließend einer intensiven Formgebung unterzogen. Die zusätzliche Imprägnierung unterstützt die Verhinderung von Korrosion. Je nachdem, welche Materialien noch mit Graphit verbaut werden, besitzen unsere Stopfbuchspackungen aus Graphit unterschiedliche Eigenschaften. Generell sind die Stopfbuchspackungen beständig gegen Druck, Alkohole, Basen, Öle, Benzine, Ketone und besitzen einen geringen Reibungskoeffizienten sowie eine hohe Querschnittsdichte und Strukturfestigkeit. Zusätzlich sind sie nicht brennbar und halten maximalen Temperaturen bis 450 °C stand. Thoenes® fertigt Stopfbuchpackungen aus Graphit. Sie sind wahlweise in quadratischer, runder oder rechteckiger Ausführung und in einer Größe von 3 bis 25 mm verfügbar. Auf Anfrage können wir Ihnen selbstverständlich Stopfbuchspackungen in anderen Materialkombinationen und Abmessungen fertigen. Jetzt Stopfbuchspackungen kaufen!

Stopfbuchspackungen kaufen im Online-Shop von thoenes®

Stopfbuchspackungen finden häufig Anwendung in der Prozess- bzw. Chemieindustrie. Sie werden für konzentrierte Säuren und Laugen sowie Lösungsmittel oder sehr hohe Temperaturen verwendet. 

Im Online-Shop von thoenes® können Sie verschiedene Stopfbuchspackungen kaufen. Auf Anfrage und Absprache fertigen wir Ihnen gern Packungsringe oder –zuschnitte an. Ebenfalls können Sie auf Anfrage Packungen im rechteckigen Maß oder auch rund (P639LR, P609PR) erhalten. Unsere Stopfbuchspackungen sind in unterschiedlichen Abmessungen erhältlich, von ca. 3x3 mm bis 40x40 mm. Sie können diese auch als Dichtsatz erwerben. Auch bieten wir Ihnen unsere Stopfbuchspackungen mit Elastomerschnur (EPDM, NBR, Viton, Silikon) als Kern an, welche sich besonders durch ihre niedrige Leckrate auszeichnen. Bei der Herstellung von Puffern in Drahtziehereien oder während des Galvanisierungsverfahrens durch Zink-Warmtauchen empfehlen wir Ihnen unsere thoenes® P641 – Aramid-Glasfaser-Packung. Die Stopfbuchspackungen bestehen aus E-Glasfasern oder auch Aramid-Endlosfasern und verfügen über extrem harte und kompakte Eigenschaften. Neben den Stopfbuchspackungen bieten wir viele weitere innovative Dichtungslösungen.

Haben Sie Fragen zu unserem Angebot an Stopfbuchspackungen oder wünschen Sie sich eine fachliche Beratung für die für Sie richtigen Stopfbuchspackungen? Dann nehmen Sie gern Kontakt zu uns auf.

Viewed